PureSource® Plus Replacement Ice and Water Filter - Set of 2
Model # WFCB2PAK
-
Color: White
-
-
-
Product Details
| Dimensions and Volume | |
| Retail Packaging Height | 6 1/5" |
| Retail Packaging Width | 4 1/5" |
| Retail Packaging Depth | 4 1/10" |
| Volume | 0.74 Cu. Ft. |
| General Specifications | |
| Country of Origin | USA |
| Filter Location | Back Top-right |
| Filter Type | Water Filter |
| Flow Rate | 0.375 gpm |
| Genuine Replacement Part | Yes |
| Installation Action | Three step install |
| Item Package Quantity | 2 |
| Maximum Operating Temperature | 100 F |
| Minimum Operating Temperature | 33 F |
| Minimum Working Pressure | 30 psi |
| Maximum Working Pressure | 100 psi |
| Product Weight | 11.4 lbs |
| Rated Capacity | 200 Gallons |
| Recommended Change Frequency | 3 - 6 Months |
| Performance Certifications and Approvals | |
| ANSI Certified | Yes |
| NSF Certified | Yes |
| Use and Care | |
| Care Instructions | Installation and Care Instructions NOTICE: Review Frigidaire Refrigerator Use and Care Guide before installation and use of system. See fits models listing on Frigidaire.com. 1. Twist off the filter housing. Remove the current filter and discard. and discard. 2. Place filter nozzle side up and twist the filter housing back in place. 3. Run water through the dispenser for approximately 3 minutes, or 1.5 gallons, to prime the filter before use. Discard the water. 4. Replace every 6 months or 200 gallons (757 liters), whichever comes first. |
| Dishwasher Safe | No |
Proposition 65 Warning for California ResidentsCancer and Reproductive Harm - P65Warnings.ca.gov